2020 Wil-Rich 2510 Series CPR 13-15
- Year 2020
- Make Wil-Rich
- Model 2510 Series
2020 Wil-Rich 2510 Series CPR 13-15
The 2500 Series Chisel Plow from Wil-Rich integrates a deeper frame front to rear in a refined design, compared to its predecessor. The deep frame utilizes four ranks to improve the flow of heavy residue from today’s higher yielding crops. The 2500 Series not only utilizes a deep frame, but also, 3/8" (9 mm) thick steel for even more strength. This makes it one of the strongest tillage implements on the market.
The Wil-Rich 2500 Series Chisel Plow is available in 12 or 15-inch (30.5 or 38.1 cm) shank spacing and with trip pressure options of 650 lbs. (295 kg) or 1,000 lbs. (454 kg). Select sizes are also available with either a level lift or floating hitch. This allows it to be built to accommodate the specific needs of your operation.
Features may include:
MAIN FRAME- 13' (4 m) main frame
- 4-bar welded frame
- 4 x 4" (10.2 x 10.2 cm) tubular frame
- 140" (355.6 cm) front to back
- Over-center folding wings
- Hydraulically controlled on floating hitch units (31×13.5-15)
- Ratchet adjust on level lift units (9.5Lx15)
- Safety chain
- Transport warning light packag
- Single-point depth control
- Two main lift cylinders
- One wing transport fold cylinder on 3' (0.91 m) and 6' (1.83 m) wing models
- Two wing transport fold cylinders on 9' (2.7 m) and 12' (3.7 m) wing models
- Level lift only on 13'-29' (4-8.8 m) models
- Level lift or floating hitch available on 31' (9.4 m) and larger
- Cat. IV tongue for 2" (5 cm) diameter pin for 2530 series or Cat. V tongue for 2¾" (7 cm) diameter pin for 2550 series
- Screw type hitch jack
- 12" (30.5 cm) or 15" (38.1 cm) spacing
- 650-lb. (295 kg) extension spring trip assemblies with 1 ¼ x 2 x 32" (3.2 x 5.1 x 81.3 cm) shank
- 1,000-lb. (454 kg) compression spring trip assemblies with 1 ¼ x 2 x 30" (3.2 x 5.1 x 76.2 cm) on-edge shank