2020 Wil-Rich 2510 Series CPR 13

2020 Wil-Rich 2510 Series CPR 13

The 2500 Series Chisel Plow from Wil-Rich integrates a deeper frame front to rear in a refined design, compared to its predecessor. The deep frame utilizes four ranks to improve the flow of heavy residue from today’s higher yielding crops. The 2500 Series not only utilizes a deep frame, but also, 3/8" (9 mm) thick steel for even more strength. This makes it one of the strongest tillage implements on the market.

The Wil-Rich 2500 Series Chisel Plow is available in 12 or 15-inch (30.5 or 38.1 cm) shank spacing and with trip pressure options of 650 lbs. (295 kg) or 1,000 lbs. (454 kg). Select sizes are also available with either a level lift or floating hitch. This allows it to be built to accommodate the specific needs of your operation.

Features may include:

• 13' (4 m) main frame

• 4-bar welded frame

• 4 x 4" (10.2 x 10.2 cm) tubular frame

• 140" (355.6 cm) front to back

• Over-center folding wings

• Hydraulically controlled on floating hitch units (31×13.5-15)

• Ratchet adjust on level lift units (9.5Lx15)

• Safety chain

• Transport warning light packag

• Single-point depth control

• Two main lift cylinders

• One wing transport fold cylinder on 3' (0.91 m) and 6' (1.83 m) wing models

• Two wing transport fold cylinders on 9' (2.7 m) and 12' (3.7 m) wing models

• Level lift only on 13'-29' (4-8.8 m) models

• Level lift or floating hitch available on 31' (9.4 m) and larger

• Cat. IV tongue for 2" (5 cm) diameter pin for 2530 series or Cat. V tongue for 2¾" (7 cm) diameter pin for 2550 series

• Screw type hitch jack

• 12" (30.5 cm) or 15" (38.1 cm) spacing

• 650-lb. (295 kg) extension spring trip assemblies with 1 ¼ x 2 x 32" (3.2 x 5.1 x 81.3 cm) shank

• 1,000-lb. (454 kg) compression spring trip assemblies with 1 ¼ x 2 x 30" (3.2 x 5.1 x 76.2 cm) on-edge shank